LIQUID FLOW DETECTORS
These devices accurately signal the flow or no flow of any liquid.

200 Series:
 

	Model	ID	OD	L	H	Flow w/o baffle*	Flow w/baffle*
	210	1"	1.65"	3.25"	2.45"	6 to 8 gpm	3 to 5 gpm
	206	1.5"	2.22"	4.36"	3.08"	10 to 14 gpm	6 to 8 gpm
	200	2"	2.75"	5.20"	3.53"	12 to 16 gpm	8 to 10 gpm
*Flow rate required to activate switch

Options:

• slip socket
• PVC or CPVC
• normally-open or normally-closed switch
• female pipe thread
• adjustable baffle
• Viton gasket (for corrosives & hydrocarbons)

300 Series:
 

This sleek, compact design is ideal for low-flow applications.

• PVC or CPVC

• brass or stainless

• normally-open or normally-closed switch

¾" MPT screws into any ¾" FPT branch Tee

	When installed in a Tee	flow rate to activate
	¾" x ¾" x ¾" Tee	1 gpm (galv.) or 2 gpm
	1" x 1" x ¾" Tee	3 gpm
	1 ½" x 1 ½" x ¾" Tee	7 gpm
	2" x 2" x ¾"	8 gpm

 

---

ADJUSTABLE LIQUID FLOW DETECTOR

Adjustable flow rates 1.5 gpm to 20 gpm PVC or CPVC Set flow rates at optimal rates

The Aqualarm Smart Switch fits a standard junction box and has two 30-amp contacts. The switch shuts off a pump when activated by low-flow or no-flow conditions. This switch works with the 200, 300-series, and 400 Flow Detectors. Installation is quick, easy, and allows start-up of a protected pump.

Aqualarm Flow Detectors prevent costly damage to pumps, heaters and other flow-dependent equipment.

Quality pool contractors and service firms use the Aqualarm pump protection to safe-guard their customers’ investments. The Flow Detector guards against: